MM230
| Product Code |
MM230 |
| Old Code |
|
| Sub Group |
Moulding Rubber |
| Description |
Addition cure moulding rubber |
| Feature 1 |
FDA compliant for non fatty foods |
| Feature 2 |
Very low shrinkage |
| Feature 3 |
Easily degassed |
| Feature 4 |
High dimensional stability |
| Pack Type |
2-Part AB |
| Rheology |
|
| RTV or Heat cure |
Heat Acclerated RTV |
| Cure Type |
Addition |
| Details |
| Colour | Various |
| Colour A Part | Various |
| Colour B Part | Translucent |
| CTE Linear ppm/ C | 170 |
| CTE Volumetric ppm/ C | 510 |
| Cure Type | Addition |
| De-Mould Time Hrs | 7 |
| Description | Addition cure moulding rubber |
| Duro Shore A | 30 |
| Elongation % | 650 |
| FDA | Yes |
| Feature 1 | FDA compliant for non fatty foods |
| Feature 2 | Very low shrinkage |
| Feature 3 | Easily degassed |
| Feature 4 | High dimensional stability |
| High / Low Tear | High |
| Linear Shrinkage % | 0.08 |
| Max Cure Hrs @ 25C | 24 |
| Max Cure Mins @ 100C | 1.00 |
| Max Working Temp +C | 200 |
| Min Working Temp - C | -60 |
| Mix Ratio | 10:1 |
| Modulus @ 100% Strain MPa | 0.90 |
| Modulus Youngs MPa | 1.05 |
| Pack Type | 2-Part AB |
| Pot Life mins | 75 |
| Product Code | MM230 |
| RTV or Heat cure | Heat Acclerated RTV |
| SG | 1.27 |
| Shelf Life Mths | 18 |
| Sub Group | Moulding Rubber |
| Tear kN/m | 25.00 |
| Tensile MPa | 4.00 |
| Viscosity A-Part mPas | 40000 |
| Viscosity B-Part mPas | 2000 |
| Viscosity Mixed mPas | 20000 |
TDS Download MSDS Download MSDS2 Download