Addition Cure Silicone Moulding Rubber

MM240TV-PrototypingAddition cure silicone moulding rubbers will normally cure at room temperature and can be accelerated using heat. 

General Attributes:

  • High tear and tensile strength
  • Very low shrinkage
  • Fine detail reproduction
  • Extensive range of hardnesses
  • Choice of catalyst and thixotroping agent

Grade

Feature

Hardness

Shore A

Tear

kN/m

Elongation

%

Viscosity 

mPa.s

Data

MM228 Translucent 28 31.00 746 13000 Mouse Click 2
MM230 Suitable for Tampo 30 25.00 650 20000 Mouse Click 2
MM242 Suitable for Tampo 40 11.50 400 15000 Mouse Click 2
MM240TV Translucent 40 22.00 330 45000 Mouse Click 2
MM720FG
Food Grade 20 23.00 546 15000 Mouse Click 2
MM730FG
Food Grade 30 27.00 600 15000 Mouse Click 2
MM740FG   Food Grade 40 11.50 400 15000 Mouse Click 2
QM260 Very hard rubber 60 14.80 190 70000 Mouse Click 2
QM270 Very hard rubber 70 12.20 100 50000 Mouse Click 2

Click her for a sample

Applications

  • Moulding of masters
  • Plaster moulding
  • Moulding of large objects
  • Rapid prototyping
  • Cornice manufacture
  • Tampo print pad manufacture
  • Case making in the ceramics industry
  • Moulding chocolate & icing sugar

Caution should be excersised as the platinum catalyst can be poisoned by sulfur containing compounds.

 

ACC Silicones Ltd, Amber House, Showground Rd, Bridgwater, TA6 6AJ
Tel: +44 (0) 1278 411400 Fax: +44 (0) 1278 411444